NJD Electronics MICRO-4 Mk.3 User Manual page 6

User Guide
satisfactorily to the bass beat of the music. The Micro-4 has
a built-in microphone so it needs no electrical connection to
the sound source, but it may also be used with a hand-held
microphone.
If sound activation is not required, rotate the sound
control fully anticlockwise.
In "Flash to sound" modes, selecting sound chase, will
make the lamps chase AND flash to sound.
Fixed speed chase
To make the Micro-4 chase at a fixed speed, turn the
Sound control fully anticlockwise, then turn the Chase
control clockwise until the lamps are chasing at the required
speed.
© N.J.D. Electronics 1997
Micro-4
-Page 6-