Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NJD Electronics MICRO-4 Mk.3
- Page 1 MICRO-4 Mk.3 Features of the Micro-4 • Totally self-contained lighting system • Built-in microphone • Jack socket for hand-held microphone • Fixed-speed or sound-activated chase • Flash to sound • Three chase patterns • 7 Programs • 2 "Run" sequences...
-
Page 2: Installation
User Guide Micro-4 IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. Installation Fix the Micro-4 with the hanging bracket provided, or stand on a flat surface by rotating the hanging bracket around the product, and using it as a foot, allowing it to be tilted to any angle. -
Page 3: Changing Lamps
User Guide Micro-4 The Micro-4 has a built-in microphone; a jack socket is also provided on the rear panel for the connection of a low- impedance microphone. This is useful for voice operation where the Micro-4 is some distance from the user. DO NOT CONNECT THE LOUDSPEAKER OUTPUT FROM A POWER AMPLIFIER TO THE MICROPHONE JACK SOCKET. - Page 4 User Guide Micro-4 new fuse, type 1.6A Quick-blow, high breaking capacity, 5×20mm. This fuse will have a ceramic case, and be labelled F1.6A. Do not replace by any other type of fuse. If the new fuse blows, consult a dealer. Cleaning.
- Page 5 User Guide Micro-4 Operating. The three controls on the rear panel of the Micro-4 are labelled Sound, Chase and Program. Select the required operating mode on the program switch: The options are: A. Single chase Chase with each lamp illuminated in sequence.
- Page 6 User Guide Micro-4 satisfactorily to the bass beat of the music. The Micro-4 has a built-in microphone so it needs no electrical connection to the sound source, but it may also be used with a hand-held microphone. If sound activation is not required, rotate the sound control fully anticlockwise.
-
Page 7: Technical Specification
User Guide Micro-4 Technical Specification. Power supply: 230V AC 1 Amp 240 W Fuse: F1.6A 5×20mm HBC to IEC127 A HBC fuse has a ceramic case. Lamps: R80 60W "Silver Spot" with E27 Edison Screw Base Red, Amber, Green and Blue Dimensions: 370 ×... - Page 8 User Guide Micro-4 © Copyright N.J.D. Electronics. Neither the whole nor any part of the information contained in, nor the product described in this User Guide may be adapted, copied, or reproduced in any form except with the prior written approval of N.J.D.