NJD Electronics MICRO-4 Mk.3 User Manual page 5

User Guide
The three controls on the rear panel of the Micro-4 are
labelled Sound, Chase and Program.
Select the required operating mode on the program
switch:
The options are:
A. Single chase Chase with each lamp illuminated in
sequence.
B. Pairs chase Chase with two lamps illuminated
together in sequence.
C. Triples chase Chase with three lamps illuminated
together in sequence.
D. All flash to sound All four lamps flash to the beat of
the music.
E. Single chase and flash to sound as A , but flashing
to the beat of the music
F. Pairs chase and flash to sound as B , but flashing to
the beat of the music
G. Triples chase and flash to sound as C , but flashing
to the beat of the music
Run all chase patterns runs through patterns A, B and
C.
Run all chase and flash patterns runs through
patterns E, F and G.
In the "Flash to Sound" modes, when there is no sound,
all four lamps will switch off. It is not possible to switch off
sound activation by rotation the sound control fully
anticlockwise in "Flash to Sound" modes.
Sound Chase
Turn the Sound control until the lamps are responding
© N.J.D. Electronics 1997
Operating.
Micro-4
-Page 5-