Radio - JVC KD-R951BT Instruction Manual

RADIO

"ST" lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1 Press B /SOURCE to select FM or AM.
Press S/ T (or press H / I on RM-RK52) to search for a station
2
automatically.
(or)
Press and hold S/ T (or press and hold H / I on RM-RK52) until
"M" flashes, then press repeatedly to search for a station manually.
Store a station
You can store up to 18 stations for FM and 6 stations for AM.
While listening to a station....
Press and hold one of the number buttons (1 to 6) to store.
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and "MEMORY" appears.
• To select a stored station: Press one of the number buttons (1 to 6).
(or)
Press MENU, then turn the volume knob to select a preset number and
press the knob to confirm.
Search for your favorite program (PTY Search)
Available only for FM source.
1 Press and hold G T/P.
2
Turn the volume knob to select a PTY code, then press the knob to
start searching.
If there is a station broadcasting a program of the same PTY code as
you have selected, that station is tuned in.
PTY code: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED,
POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M
(music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE,
JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT
Activate TA Standby Reception
Available only for FM source.
Press G T/P.
The unit will temporarily switch to Traffic Announcement (TA) (if
available) from any source other than AM.
• To deactivate, press G T/P again.
Other settings
1 Press and hold MENU.
2
Turn the volume knob to select [TUNER], then press the knob.
3
Turn the volume knob to make a selection ( 8), then press the
knob.
4
Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
ENGLISH | 7