Tdif; Multi-Aes/Ebu - Akai DR16 Operator's Manual

GPO
GPO outputs the DR16's operation status. For example, it can cause an external indicator to light up
during recording.
Pin number
GPO-1
GPO-2
GPO-3
GPO-4
GPO-5
GPO-6
GPO-7
GPO-8
GPO-9
GPO-10
GPO-11
GPO-12
Note: Set the GPI's input reference level to 5V and the trigger level (LOW) to 0V. Also, set the
GPO's output reference level to 5V and the tally level (LOW) to 0V.

TDIF

Installing an optional board IB-D8TIF allows the DR16 to input and output a digital signal using a
TASCAM digital interface. Note that you cannot use the board for the TEAC TASCAM meter unit that
comes with the optional board.
1) Press the SUB-MENU key.
2) Press the DIGI/D-IN key.
3) Use the jog wheel to select
4) Press the STORE/ENT key.
Note: You cannot use this board in conjunction with another optional board IB-804A (ADAT interface
board) or IB-D8MA (Multi-AES/EBU interface board) .

Multi-AES/EBU

Installing an optional board IB-D8MA allows the DR16 to input and output 8-channel digital signal in the
AES/EBU digital audio signal format.
1) Press the SUB-MENU key.
2) Press the DIGI/D-IN key.
3) Use the jog wheel to select
4) Press the STORE/ENT key.
Note: You cannot use this board in conjunction with another optional board IB-804A (ADAT interface
board) or IB-D8TIF(TASCAM digital interface board).
Operation
Outputs LOW when TRACK REC1 is ON.
Outputs LOW when TRACK REC2 is ON.
Outputs LOW when TRACK REC3 is ON.
Outputs LOW when TRACK REC4 is ON.
Outputs LOW when TRACK REC5 is ON.
Outputs LOW when TRACK REC6 is ON.
Outputs LOW when TRACK REC7 is ON.
Outputs LOW when TRACK REC8 is ON.
Outputs LOW during recording (or recording stand-by mode).
Outputs LOW during playback.
Outputs LOW when the Rehearsal key is ON.
(No action)
TDIF
.
AES8
.
7
DR16 Addendum
Version 2.3