Inter-m IMN-511 Operation Manual page 13

1 1
1 1
SERIAL TERMINAL PORT
.
Connects to "RS-485 communication cable" for PAN/TILT/
ZOOM/FOUCS Controllers
- + : Connects to "+" port of RS-485 communication cable
- – : Connects to "–" port of RS-485 communication cable
2 2
2 2
SENSOR IN/OUT PORT
.
Connects to 1 sensor input and 1 output(TTL)
- IN : Connects to "+" port of the Sensor Input
- OUT : Connects to "+" port of the Sensor Output
- GND : GROUND
3 3
3 3
AUDIO IN/OUT PORT
.
Connects to 1channel MIC and 1channel speaker
- SPK : Connects to "+" port of the Speaker
- MIC : Connects to "+" port of the MIC
- GND : GROUND
4 4
4 4
LAN(ETHERNET) PORT
.
Connects to Ethernet(10/100Base-T) and xDSL/Cable
modem network with RJ-45 Connector.
*Supportable network type : LAN(10/100 Base-T)
5 5
5 5
POWER INPUT TERMINAL
.
Supplies the power to IMN-511/512 with a DC 12V input
terminal.
External Power : DC Power Adaptor(12V)
Power Consumption : 7.2Watt@12V DC for IMN-511
6 6
6 6
AUTO IRIS LENS CONNECTION PORT
.
It is a port for connection of a video iris lens or DC iris lens, if
they are used.
7 7
7 7
AUTO IRIS SELECTION SWITCH
.
With an auto iris lens mounted, you can select DC iris lens or
a video iris lens using this switch.
8.4Watt@12V DC for IMN-512
IMN-511/512(HIGH RESOLUTION IP CAMERA)
11