LG DLEX0001TM Service Manual page 9

Pedestal Installation Instructions
For washer, dryer, and combo LG 27"
Remove pedestal, installation hardware, and
1
instructions from the shipping carton.
Position the dryer on top of the pedestal.
2
Remove the paper from the
3
bracket.
NOTE: That the Pedestal
hardware packet may in-
clude 2 sets of side
brackets. Be sure to use
the brackets marked for
the dryer.
,
for washer/
combo
for dryer
for dryer
for washer/
.
combo
Attach the double-faced tape of the bracket to the
4
After removing the protective covering from the
dryer as shown so the bent parts of the brackets adhesive surface, align the screw holes in the
brackets with the matching holes in the pedestal
align with the edge and can be attached to the
base and press and press the brackets against
pedestal with screws.
the base and the dryer.
NOTE :
Attach the lower side first.
Be sure to press the adhesive parts of the brackets
5
firmly to the appliance.
Install the eight (8) screws(supplied) to attach the
6
brackets to the pedestal.
Move the dryer to the desired place.
7
NOTE :
The appliance and pedestal assembly
must be placed on a solid and level floor
for proper operation. Adjust the legs of the
appliance and pedestal by turning with a
wrench. Then, adjust the lock unt toward
the pedestal while holding the pedestal leg
using a wrench.
8