Oki C5650 Maintenance Instructions Manual page 194

(4) Hold the fuser unit again by the handle and put it gently back in the printer.
(5) Push the lock levers (2, blue) of the fuser unit toward the rear, and fasten the unit
Note!
After a jammed paper has been removed from the fuser unit section, unfixed toner may
still remain inside the fuser unit. Therefore, execute the Menu Map print (Subsection
3.6), or print blank paper several times.
If the paper jam error is not cleared even after the jammed paper has been removed, remove the
other jammed paper by the procedure described below.
(1) Discharge static electricity by touching the screw by hand.
43827101TH Rev.2
Fuser unit
locking lever (blue)
Handle
Screw
Oki Data CONFIDENTIAL
194 /