INSTALLATION
3. Fasten the four Holder-Screws 1 and four of the Holder-Screws 2 to the four holes in the Soundbar, as
shown in the illustration.
4. If the Holder-Foot (3 pieces) is attached, remove it as shown in the illustration above.
5. (For mounting to a S9500, 65" TV model only. For other models, skip this step and go to Step 6.)
Seat the Holder-Mount on the TV using the Guide on the TV to position the Holder-Mount correctly.
Carefully align the Holder-Mount's hole so that the Holder-Mount is centered on the TV and not skewed
to one side. use four Holder-Screws 2 to fix the Holder-Mount to the TV. When done, go to Step 6.
65" S9500 TV
12