Advertisement
Quick Links
Instruction Manual for the
Globe Gas Countertop Hot Plate
Models: GHP12G, GHP24G, & GHP36G
For Service on Your Gas Hot Plate:
1. Visit our website at www.globefoodequip.com
2. Or call the Globe Service Department at 937-299-8625 and ask for contact
information for your local service company.
Visit our website for information on additional products available from Globe.
www.globefoodequip.com
Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers & Scales
- IMPORTANT SAFETY NOTICE -
This manual contains important safety instructions which
must be strictly followed when using this equipment.
WARRANTY REGISTRATION
SCAN THE QR CODE WITH YOUR MOBILE DEVICE OR GO TO
WWW.GLOBEFOODEQUIP.COM
TO FILL OUT AND SUBMIT YOUR WARRANTY REGISTRATION.
.
www
globefoodequip
GHP24G
with Manual Control
.
/
/
-
com
support
warranty
registration
Serial #:
-
form
Advertisement
Related Manuals for Globe GHP12G
Summary of Contents for Globe GHP12G
- Page 1 For Service on Your Gas Hot Plate: 1. Visit our website at www.globefoodequip.com 2. Or call the Globe Service Department at 937-299-8625 and ask for contact information for your local service company. Visit our website for information on additional products available from Globe.
-
Page 3: Table Of Contents
WEBSITE: www.globefoodequip.com WARRANTY REGISTRATION SCAN THE QR CODE WITH YOUR MOBILE DEVICE OR GO TO WWW.GLOBEFOODEQUIP.COM TO FILL OUT AND SUBMIT YOUR WARRANTY REGISTRATION. globefoodequip support warranty registration form © Globe Food Equipment Company, 2014 03042014 Ver. 1 Rev. 1_2014... -
Page 4: Attention Owners And Operators
Do not attempt to repair or convert any gas types on your own. Repairs and conversions are to be made solely by an authorized Globe servicer. Owners should also ensure that no customers, visitors or other unauthorized personnel come in contact with this equipment. Please remember that Globe cannot anticipate every circumstance or environment in which this equipment will be operated. -
Page 5: Unpacking & Installation
If the equipment is found to be damaged, save the packaging material and contact the carrier within fifteen (15) days of delivery. Immediately contact Globe service or your local dealer of the equipment. You have no recourse for damage after fifteen (15) days of receipt of hot plate. -
Page 6: Unpacking & Installation
5. Level unit by adjusting the four feet and tighten securely. The feet have an adjustment of one inch for line up with other Globe countertop products. Do not slide unit with legs mounted, lift if necessary to move unit. -
Page 7: Warnings & Safeguards For Operation
• Globe takes every care to ensure that all products are safe. Steel cutting procedures used to manufacture these items result in sharp edges. These sharp edges are removed to the best of our ability; however, we insist the operator take care when in contact with this piece of equipment. -
Page 8: Operating Instructions
Operating Instructions Operating the Hot Plate - Pilot Lighting Instructions Before operating the hot plate, it should be checked to see that it is sitting level. Adjust the feet to level the hot plate. Be sure the catch tray has been properly placed. The pilot lights on the appliance have been set at the factory. -
Page 9: Cleaning Instructions
Cleaning Instructions • DO NOT use any abrasive or flammable cleaning fluids. • DO NOT hose down, immerse or pressure wash any part of the hot plate, excluding the catch tray. • NEVER use a scrubber pad, steel wool or abrasive material, or cleaners containing chlorine, iodine and ammonia or bromine chemicals as these will deteriorate the stainless steel and shorten the life of the unit. -
Page 10: Troubleshooting
Conversion from Natural Gas to Globe. Do not attempt conversion on L.P. is possible for this unit your own If problems persist and the assigned solution does not remedy the issue, please call Globe’s Service Department at: 866-260-0522. Page 10... -
Page 12: Limited Warranty
Limited Warranty Globe Food Equipment Company (“GFE”) warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 2 year. The labor warranty is two year from original installation or 18 months from actual factory shipment date whichever date occurs first.
Need help?
Do you have a question about the GHP12G and is the answer not in the manual?
Questions and answers