Table of Contents
Advertisement
(These settings are general starting points. They are designed to get you
close to the sound you are looking for. If the control is not shown, then it
MI C/ LI NE
Standard Single Input Setup -
(Remember, if you are using an active guitar or pre-amplified guitar, press the active switch in. We
also suggest that you turn it's output level to about mid way up and this will give you a cleaner sound
as well as giving you available headroom for leads.) The tone controls follow both inputs. Of course,
you can adjust the tone controls to any desired sound but in this setup, we suggest these tone control
settings. It will deliver a clear, clean sound that has enough top end clarity to cut through. Add low and
low mid for a beefier presence but be careful as this can "muddy up" the sound. Adjust the feedback
control to eliminate those unwanted "ringing" frequencies.
Adjust the Digital effects to suit the music or to your taste.
MI C/ LI NE
Standard Dual Input Setup -
input jack and a Hi-Z microphone is plugged into mic/line Input. Assuming you are also using a
microphone, plug it into the mic/line jack and slowly turn up the mic/line volume control. Balancing the
two types of inputs gives you a much more natural acoustic guitar sound. You could also plug in any
combination of inputs such as: keyboards, microphones or other guitars.
This can also be a basic mini-PA system. It could be used for plugging in a CD player or cassette
decks and a microphone for singing. It can be used for playing over prerecorded tapes with mixing
capabilities.
As mentioned earlier, you can adjust the tone controls to any desired sound but in this setup we
suggest these tone control settings. Of course it depends on the listening environment. It will deliver a
clear, clean sound that has enough top end clarity to let the acoustic sound cut through.
Adjust the Digital effects to suit the music or to your taste.
Suggested Settings
doesn't apply to this particular sound. )
PREAMP
FEEDBACK
GUI TAR
FREQUENCY
LOW
MI C/ LI NE
GUI TAR
I NPUT
I NPUT
MI C
ACTI VE
LI NE
PASSI VE
in this setup your acoustic/electric guitar is plugged into input 1.
PREAMP
FEEDBACK
GUI TAR
FREQUENCY
LOW
MI C/ LI NE
GUI TAR
I NPUT
I NPUT
MI C
ACTI VE
LI NE
PASSI VE
in this setup two inputs are utilized. Guitar is plugged into guitar
EQUALI ZER
DI GI TAL EFFECTS
MI D
HI GH
LEVEL
EFFECTS
ON
OFF
EQUALI ZER
DI GI TAL EFFECTS
MI D
HI GH
LEVEL
EFFECTS
ON
OFF
5
PROGRAM
5
1. BRI GHT ROOM
4
6
2. MELLOW ROOM
3. BRI GHT HALL
3
7
4. MELLOW HALL
5. CHORUS
6. CHORUS/ ROOM
2
8
1
7. CHORUS/ HALL
8. SLAPBACK
PROGRAM
5
1. BRI GHT ROOM
4
6
2. MELLOW
ROOM
3
7
3. BRI GHT HALL
4. MELLOW HALL
2
8
5. CHORUS
1
6.
Advertisement
Table of Contents
