Troubleshooting; Taking Care Of Your Headset - Norton Clip-on Owner's Manual

Troubleshooting

If you cannot connect the headset to your phone, do as follows :
• Ensure that the headset is charged, switched on, and
paired with and connected to your phone.
•
Ensure that the Bluetooth feature is activated on your
phone.
• Check that the headset is within 10 meters (30 feet) of
your phone and that there are no obstructions between
the headset and the phone, such as walls or other
electronic devices.

Taking care of your headset

Keep all accessories and enhancements out of the
!
reach of small children.
Keep the device dry. Precipitation, humidity, and all
!
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, allow it to dry completely.
Do not use or store the device in dusty, dirty areas. Its
!
moving parts and electronic components can be
damaged.
Do not store the device in hot areas. High
!
temperatures can shorten the life of electronic devices,
damaged batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device
!
returns to its normal temperature, moisture can from
inside the device and damage electronic circuit boards.
Do not attempt to open the device
!
Do not drop, knock, or shake the device. Rough
!
handling can break internal circuit boards and fine
mechanics.
Do not use harsh chemicals, cleaning solvents, or
!
strong detergents to clean the device.
34 35 |