Charging The Battery - Norton Clip-on Owner's Manual

Charging the battery

Before using the Bluetooth Headset, you need to
charge the built-in rechargeable
approximately 2 hours. When the battery is fully
charged, it provides up to 7 hours talking time and up
to 200 hours standby time.
1. Connect the AC battery charger cable's
USB plug to Bluetooth Headset's USB socket.
2. Plug the charger's AC plug to AC outlet.
When charging, the Bluetooth Headset's status
indicator lights red.
3. When the battery is fully charged, the
status indicator turns off. Unplug the charger cable
from AC outlet and Bluetooth Headset.
Pairing to a Bluetooth mobile phone
Pairing is the process for linking the headset with your Bluetooth
enabled mobile phone. After this process is completed, you can
battery for
use the Bluetooth Headset with the paired mobile phone. The
Bluetooth Headset can be paired with up to 8 compatible phones
but connected to only one phone at a time.
1. Press and hold the Power/Send/End key for 5 seconds to turn
on the BluetoothHeadset and make sure the headset is within 10
meters range from the mobile phone.
2. Press and hold volume up and volume down key together for
about 2 seconds. The blue and red LEDs flash alternatively.
Release both buttons and the headset is now in the pairing mode.
3. Activate the Bluetooth connection with the mobile phone
according to the mobile phone's user's guide.
4. Set the mobile phone to search for the Bluetooth devices
according to the mobile phone's user's guide.
5. Select the Bluetooth Headset from the phone menu.
2 | 6 27