Operation - Norton Clip-on Owner's Manual

Operation

To turn on the headset
Press and hold the Power/Send/End key for 5 seconds. The
headset beeps once and the status indicator lights blue for about
1 second.
To turn off the headset
Press and hold the power key for 2 second, the headset beeps
once and the status indicator lights red for about 1 second.
Making a Phone Call
When the headset is connected to the phone, make a call using
the phone in the normal way.
Note: the call functions depending on the phone type you use.
Please refer to the manual of your phone for the related function.
Answering and Ending a Phone Call
When a call comes in, you hear a ringing tone through the
headset.
Press the Power/Send/End key to answer the call or to end an
active call. To increase volume of the incoming call, press Volume
up +; to reduce volume, press volume .
You can also answer and end the call through the mobile phone.
Operation
Note: Some phones offer Auto Answer function and may be
used with the headset or speakerphone, but this is a phone
dependent feature. Please refer to the manual of your phone for
that function.
Rejecting a Call
When you receive an incoming call that you do not want to
answer, double press the Power/Send/End key.
Adjusting the Earphone Volume
Press the volume up + key to increase or the volume down key to
decrease the volume.
Redialing the Last Dialed Number
(Phone dependent)
Press the volume up key for 2 seconds when no call is in progress.
Muting an Ongoing Call
To mute or unmute the ongoing call, press the Power/Send/End
and Volume up + keys together for 2 seconds when a call is in
progress.
Voice Dialing (Phone dependent)
When no call is in progress, press volume down key and hold it
for 2 seconds till a tone prompting you to start the voice tag. The
phone plays the voice tag and dials the related phone number.
30 31 |