TABLE OF CONTENTS 1. FEATURE CHART 2. WIRING DIAGRAM 3. PART DETAILS 4. MAIN COMPONENTS 5. TEMPERATURE CONTROL INSTRUCTION 6. PARTS LIST 7. REPLACEMENT OF MAIN COMPONENTS...
Page 5
FEATURE CHART 1-3. TBC-50SD/SB, TBC-65SD/SB 1. LID 11 CUSHION SPACER 11.CUSHION SPACER 2. COUNTER TOP 12. DUCT(A) 3. LID RAIL LEFT 13. DUCT(B) (LOUVERED) 4. LID RAIL MIDDLE 14. EVAPORATOR COIL 5. LID RAIL RIGHT 15. EVAPORATOR DRAIN ELBOW & HOSE 6.
Page 6
FEATURE CHART 1-4. TBC-80SD/SB, TBC-95SD/SB 1~21 PART : Refer to the TBC-50SD/SB LIST 22. DUCT(C) 23. DUCT(D) 24. SUCTION LINE COVER(HORIZONTAL)
3-1. EVAPORATOR FAN MOTOR Evaporator Fan Blade Motor Bracket Evaporator Fan Motor 3-2. CONDENSER FAN MOTOR Condenser Fan Blade Motor Bracket Condenser Fan Motor TBC-24SD/SB TBC-36SD/SB M t B Motor Bracket Condenser Fan Motor Condenser Fan Blade TBC-50SD/SB TBC 50SD/SB...
Page 10
PART DETAILS 3-3. DUCT(A) : EVAPORATOR FAN MOTOR DUCT 3-4. DUCT(B),(C),(D) DUCT(B) DUCT(D) DUCT(C)
1 COMPRESSOR 1. COMPRESSOR HORSE TYPE OF Current MODEL PART NAME PART NO. CAPACITY MAKER POWER MOTOR (RLA) 373 BTU/h TBC-24SD/SB HFL11Y-1 30289A0400 1/10 HP 1.9A DAEWOO (94 Kcal/h) RSIR 896 BTU/h 896 BTU/h TBC-36SD/SB HBL27YE-1 3952127G10 1/4 HP 3.7A...
Page 16
MAIN COMPONENTS 4 EVAPORATOR FAN MOTOR 4. EVAPORATOR FAN MOTOR MODEL PART NAME PART NO. POLE BLADE SIZE MAKER DAI-6202DEUA 3963339930 ZITEL 110mm DAE-YOUNG 5. CONDENSER FAN MOTOR MODEL PART NAME PART NO. POLE BLADE SIZE MAKER TBD-1SD IS-3225DWSQ-2 3963326710 ZITEL 150mm SUNG-SHIN...
5. TEMPERATUR CONTROL INSTRUCTION 5-1. HOW TO USE THE TEMPERATURE CONTROL ▶ Temperature can be controlled by the user. ▶ Settings can be changed by “Dial Knob”. ▶ Compressor is automatically turned on and off by thermostat. ▶ Compressor is automatically turned on and off by thermostat. TEMPERATURE CONTROL 5-2.
7. REPLACEMENT OF MAIN COMPONENTS ▶ CAUTION : U ▶ CAUTION : Unplug the unit before replacing any part. it b f 7-1. REPLACING DOOR THE EVAPORATOR COIL A. Remove all lids. Remove the dividers. (Now, you can replace the evaporator fan motor or the temperature control(thermostat) if you unscrew the duct(A) or the temperature control box.) B.
Page 21
REPLACEMENT OF MAIN COMPONENTS D. Carefully move the countertop to a safe place. See the join bracket and understand join system. E. This is the duct(A) and the temperature control box. Unscrew the temperature control box if necessary. E. Unplug the temperature control harness assembly.
Page 22
REPLACEMENT OF MAIN COMPONENTS G. Pull the sensing tube of the temperature control. Replace the temperature control if necessary. H. Remove the screws on duct(A) and Remove. I. Unplug the evaporator fan motor harness assembly if necessary.
Page 23
REPLACEMENT OF MAIN COMPONENTS J. Remove screws to the evaporator fan motor if necessary and replace it with new one. K. Remove the screws on duct(B) and Remove. L. Remove the screws on the suction line cover(horizontal) if necessary.
Page 24
REPLACEMENT OF MAIN COMPONENTS M. Remove screws to the duct(C) and the duct(D) if necessary. N. Now evaporator coil is visible. To replace it, cut out at the welding point between the accumulator and the suction line, and also of the end of the capillary tube.
Page 25
REPLACEMENT OF MAIN COMPONENTS O. Remove screws to the duct(C) and the duct(D) if necessary. 7-2. ACCESSING CONDENSER COMPARTMENT A. After removing the front grille assembly, unscrew the compressor base. Pull the compressor compartment slowly. Compressor, Condenser coil, Condenser fan motor, etc. can be replaced. In pushing the compressor compartment to the original position please be careful so the In pushing the compressor compartment to the original position, please be careful so the •...
Need help?
Do you have a question about the TBC-24SD and is the answer not in the manual?
Questions and answers