Table of Contents
Advertisement
MC-8100U
· Catcher operation (SUBMODE = 03)
Function
Catcher leftward move
Catcher rightward move
· Tray pickup/return operation (SUBMODE = 04)
Function
Left tray auto loading
Right tray auto loading
Tray auto return
* Left (Right) Tray Auto Loading Operation
1. Catcher moves toward left (right) → 2. Left (right) tray lock release → 3. Tray pickup
* Tray auto return operation
1. Catcher moves toward the direction of the tray lock pin (Tray return) → 2. Tray lock initial When the printer operation is performed,
set the disc-in tray on the printer beforehand.
· Mail slot operation (SUBMODE = 05)
Function
Mail slot ejecting
Mail slot loading
· Optional printer operation (SUBMODE = 06)
Function
Printer ejecting
Printer loading
· Disc inversion operation when an inversion carrier is installed (SUBMODE = 07)
Function
Arm upward movement
Arm downward movement
Disc inversion
2
Drive Manual Operation
· Clamping & Clamping release operation (SUBMODE = □ 0) □ : Drive No. 1 - 4
Function
Drive clamping
Drive clamping release
When the MC-R200U drive is used and the tray is in the drive, the clamping release operation is activated 3.5 seconds later (however,
the 1st operation for each drive starts after 7 seconds) the key is turned ON (the motor starts rotating) to wait until the disc revolution
stops.
· Play operation (SUBMODE = □ 1) □ : Drive No. 1 - 4
Function
Play ON
Play OFF
2-13
Numeric key
1
During key is ON
2
During key is ON
Numeric key
1
Each time key is ON (Condition: Tray lock initial, Catcher position right)
2
Each time key is ON (Condition: Tray lock initial, Catcher position left)
3
Each time key is ON (Condition: Tray lock initial, Catcher position left or right)
Numeric key
1
During key is ON, until eject position is reached
2
During key is ON, until loading position is reached
Numeric key
1
Each time key is ON, until ejecting position is reached
2
Each time key is ON, until loading position is reached
Numeric key
1
During key is ON (Condition: Tray lock initial)
2
During key is ON (Condition: Tray lock initial)
3
Every time key is ON (Condition: Tray lock initial)
Numeric key
1
During key is ON, until clamping position is reached
2
Each time key is ON
Numeric key
1
Each time key is ON (Condition: CD-ROM disc must be clamped)
2
Each time key is ON (Condition: CD-ROM disc must be clamped)
Details
Details
Details
Details
Details
Details
Details
Advertisement
Table of Contents
