Table of Contents
Advertisement
2. NAMES AND FUNCTIONS OF PARTS
2-1. Front panel, right side panel, rear panel
1
POWER switch ................... Turns the main unit power on/off. "I": On. "O": Off.
2
Power indicator ................. Lights up when the POWER switch is on. Blinks in case of error during operation.
3
LCD display ....................... Shows information using alphanumeric characters.
4
MODE key .......................... Used for LCD page selection and other operations.
5
SELECT key ....................... Used for switching mode displays and other operations.
6
LOAD/EJECT key .............. Opens or close the mail slot.
7
ENTER key ......................... Used for LCD page selection and other operations.
8
10-key ................................. Used for selecting tray Nos. and changer SCSI ID Nos. for import/export operations.
9
Mail Slot ............................. Used for disc insertion/ejection.
0
Key cylinder ....................... After completing the door opening mode, insert a key in the cylinder and turn it counterclockwise.
!
Rear panel .......................... Opened and closed when installing or replacing drive units.
@
SCSI connectors ............... One SCSI-2 connector port system (A: IN, B: OUT) is provided as standard.
#
RS-232C connector ........... 9-pin D-sub connector (plug) for use in maintenance.
$
AC inlet (main unit) ........... Insert the provided power cord in the AC inlet and plug the other end to a 120 V - 240 V,
%
Side panel (Drive) .............. Open and close when installing or replacing drive units.
^
&
,
Side panel (Printer) ..... To be removed when incorporating the optional MC-AP30U color disc printer.
Control panel : the display section and the keys (
referred to as the control panel.
2
3
Front panel
1
6
50 Hz/60 Hz AC power outlet.
2
8
-
1
2
3
POWER
4
5
6
7
8
9
MODE
SELECT
LOAD/EJECT
0
ENTER
4 5 6
7
Right side panel
9
0
) will be
SCSI-B
8
SCSI-A
%
Rear panel
@
^
&
!
#
$
Advertisement
Table of Contents
