Setup - JVC MC-8100U Service Manual

3. SETUP

The standard setup procedure is shown below. Set up the equipment accordingly.
Unpack and check that all the attachments are included.
Remove the transport protective materials (2 places.)
A large number of discs can be loaded quickly(bulk load).
1
*
Please have your dealer or nearest JVC service center perform this task.
2
*
Start
Open the transport lock
Mount the optional carrier
Install the drive units
Initial setup of SCSI-ID No., etc.
Connect the power cord and cables
Execute the automatic drive detection mode.
Load discs in the magazines
Turn the power switch on.
Completion
Proceed to the host computer setup
2
* .
1
*
P.10
P.11
P.21
P.12
P.13
P.22
P.18, 25
9