Installing The Bobbin - eMotions Embroidery Machine User Manual

Installing the Bobbin

To put the bobbin in the machine, follow these steps:
1.
Slide open the bobbin cover by sliding the small black slide bar to
the right. Remove the plastic cover. If the clear plastic cover does
not flip up, slide it to the right a bit.
2.
Insert the bobbin into the shuttle with the thread direction as
noted in the etching under the bobbin cover.
3.
Guide the thread around the finger of the machine through the
channel toward the back, and then pull the thread toward you to
cut the thread end. The thread will be cut at the end of the channel
and be ready for use.
14
eMotions TM 2005 Blosil Enterprises, LLC. Produced under License by OESD, Inc. All manual contents © 2005 OESD, Inc.
eMotions Manual 7x9.indd 14 7/22/2005 11:11:08 AM