The Power Adapter And Battery - SimPal G4 User Manual

2.2 The power adapter and battery

Connecting to the power adapter
• Connect the plug to the power interface of the SimPal camera and then connect the
adapter to an AC power.
The built-in rechargeable Lithium battery
battery.
SimPal-G4 3G SECURITY CAMERA USER MANUAL
• The camera will notify the user when the power
• If SimPal camera is again connected to the
• Low battery: The configure setting can not be
changes. For example, if the power adapter is
disconnected or failure of the AC power occurs,
SimPal camera will notify the user "External
power cut. The device is operating on battery."
external power, or the AC power is available
again, the notification will be sent to the user,
i.e." The device is now resuming the use of
external power source."
saved when SimPal camera is operating on low
10