2–4 PREPARATIONS OF BODYWORK
3. CORRECTION OF THE DAMAGED
AREA
•
Set the frame corrector on the car body.
•
The side frame is to allow reshaping by pulling it out.
•
Use the horizontal pinch welds for anchoring the car.
UNDERBODY CLAMPS
STANDARD TYPE:
C-TYPE:
U-TYPE:
Underbody Clamp Specifications
Frame correctors
Fig. 2
•
Apply load to the damaged section and pull it
out until the section is almost restored to the
original shape.
Standard type
•
Dataliner
•
Car-o-liner
•
Celette
•
Flex-o-liner
•
etc.
U-type
C-type
•
U-Base
•
Korek
•
Pro-Tec
•
Auto pole
•
etc.
•
etc.