Optical Disk Drive - Toshiba Satellite P500 Maintenance Manual

Replacement Procedures
4.5

Optical disk drive

NOTE: Do not apply excessive force to the top of an optical disk drive.
Do not touch the shaded portion of the figure below, when the drive is removed
or installed.
Removing an optical disk drive
The following describes the procedure for removing an optical disk drive (See Figure 4-5-
1and 4-5-2).
1. Remove MAIN HDD Slot cover and next remove the following screws securing an
optical disk drive.
•
2. Disconnect an optical disk drive toward the arrow direction from the connector
CN26 on the system board.
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
M2.5×3.0B FLAT BIND screw
Figure 4-5-1 Remove an optical disk drive
x1
4-16