Display - Information Center Dashboard - Polaris EV501 Manual

DIsPLAY – INFoRMAtIoN CENtER DAshBoARD
The iC Dashboard™ provides key riding information necessary for every rider.
it displays speed, odometer, trip time, battery status and regeneration status.
The display flashes reGen whenever the motor is in regenerative function. Most
importantly, eVantage has built-in software to automatically self diagnose itself. it
informs the rider that troubleshooting may be required by displaying fault codes on
the iC dashboard should there ever be a motor, battery or display issue. The display
itself was built to be small in size, light in weight, and rain proof. The leD backlight
allows for night time use of the display.
ECo, UtILItY, AND sPEED AssIstANCE LEVELs
When the system is off, you are riding a conventional bicycle. To activate
assistance, turn the system on. The system activates at sPeeD 3 level mode and
displays current gear selection.
Note:
The console automatically switches off after 30 minute of inactivity.
WARNING sIGNALs
WARNING Icon:
in the event of a technical issue, the WarninG icon will display along with the
fault code in question
Empty Battery Warning
in the event the battery charge level becomes discharged, the empty battery icon
will flash before the motor turns off automatically.
18
IC DAshBoARD™ CoNtRoL INstRUCtIoNs
Press power button on the battery, then turn on iC
Dashboard display.
Press the uP or DoWn buttons to scroll up or down until
the desired level is reached
speed 3 assist mode
utility 2 assist mode
eco 1 assist mode
REGEN
–1
-1 Perpetual arc regeneration / active Trail
–2
– 2 Perpetual arc regeneration / active Trail
To change the display from kilometres per hour to miles per
km/h <> MPh
hour, press, hold and release the uP button for 3 seconds
and release.
To scroll from odometer to trip distance and vice-versa,
press (i) for 3 seconds
odom = odometer
Trip = Timed distance (automatically resets to zero
when the ebike is turned off)
To turn the lCD backlight on/off, press and hold the
" " button for 3 seconds
▼
*
note: When power on main battery is turned on, the current gear selection
will be displayed on the iC dashboard
IMPoRtANt: if there is motor vibration felt during operation, this is due to the bike
being in an inappropriate gear for the riding terrain, or weak pedal cadence.
To correct adjust gear accordingly and increase pedal cadence.
19