Opus CS 2418 CD User Manual

Opus CS 2418 CD User Manual

Advertisement

User's guide CS 2418 CD
User's guide
CS 2418 CD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS 2418 CD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Opus CS 2418 CD

  • Page 1 User’s guide CS 2418 CD User’s guide CS 2418 CD...
  • Page 2 User’s guide CS 2418 CD Health & Safety precautions • Before using, the equipment please read the Health & Safety precautions, manufacturers’ recommendations and the operating manual. • The operating manual should be available at all times for the operator to read.
  • Page 3 User’s guide CS 2418 CD Equipment configuration 1 – Feeding slot for paper 5 – REV (reverse jammed paper from 2 – Feeding slot for CD, credit card feeding slot) and disks 6 – FWD (knives will rotate forward) 3 – Power supply diode (green) 7 –...
  • Page 4 User’s guide CS 2418 CD Operation: • Machine should be placed on sturdy and level surface. • Before plugging in the machine, ensure that the main switch is in “0” position. • Set the main switch in „I” position → stand-by light turns on.
  • Page 5 • After filling the waste bin for several times., the blades should be greased with special oil (provided by OPUS). Put the oil on few pieces of paper and shred them so that the oil was spread on the whole cutting mechanism...
  • Page 6 User’s guide CS 2418 CD dystrybutor: OPUS Sp. z o.o. ● ul. Toruńska 8 ● 44 – 122 Gliwice ● www.opus.pl...

Table of Contents