16
Operating
Radio Operations
Listening to the radio
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning : Press TUN.-/+ on the remote
control or Y/U on the unit for about 2
seconds until the frequency indication starts
changing, then release. scanning stops when
the unit tunes in a station.
Manual tuning: Press TUN.-/+ on the remote
3
control or Y/U on the unit repeatedly.
3. Adjust the volume by using VOL+/- on the
remote control or VOLUME-/+ on the unit
repeatedly.
CM1930-DP.ADEULLK ENG 6449.indd 16
CM1930-DP.ADEULLK ENG 6449.indd 16
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
2. Select the desired frequency by pressing
TUN.-/+ on the remote control or Y/U
on the unit.
3. Press PROGRAM/MEMORY. A preset number
will blink in the display window.
4. Press PRESET/FOLDER W/S on the remote
control to select the preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET/FOLDER
W/S.
Improving poor FM reception
Press d/M on the remote control or T on the
unit. This will change the tuner from stereo to
mono. Then the reception will be better than
before.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for
two seconds. "ERASE" will blink in the display
window.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
2014-01-21
2014-01-21
10:06:12
10:06:12