20
Operating
To select recording bit rate
and speed (AUDIO CD only)
1. Press REC on the remote control for longer than
3 seconds.
2. Use C/V on the remote control or Y/
U on the unit to select the bit rate.
3. Press REC on the remote control again to select
the recording speed.
4. Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed :
X1 SPEED
- You can listen to music while recording it.
3
X2 SPEED
- You can just record the music file.
5. Press REC on the remote control to finish the
setting.
CM1930-DP.ADEULLK ENG 6449.indd 20
CM1930-DP.ADEULLK ENG 6449.indd 20
,
Note
You can check the recording percentage
rate for the USB record on the display
window during the recording.
(MP3/WMA CD Only)
During recording MP3/WMA, there is no
sound.
When you stop recording during playback,
the fi le that has been recorded at that time
will be stored. (Except MP3/WMA fi les)
Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete fi le may be made and not
deleted on PC.
If USB recording does not work, the
message like "NO USB", "ERROR", "FULL" or "NO
REC" is displayed on the display window.
Multi card reader device or External HDD
can not be used for USB recording.
A fi le is recorded by about 512 Mbyte when
you record for a long term.
It'll be stored as follows.
AUDIO CD
MP3/WMA
* : TUNER, PORTABLE and the like.
The making of unauthorized copies of copy-
protected material, including computer
programs, fi les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal off ense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
The other
source*
2014-01-21
2014-01-21
10:06:12
10:06:12