Power Requirements - Sharper Image SI785 Instructions Manual

Power Requirements

Activate the two CR2032
BATTERY COMPARTMENT
back-up batteries by removing
(Bottom of unit)
the paper tab from the battery
BACK-UP BATTERIES
compartment. Replacement of
(Inside battery compartment)
these batteries is required every
9K/10K SWITCH
2-3 years.
(See radio section of manual.)
Install 6 AA alkaline batteries.
Use only fresh/new batteries in
this product. Replace all 6 used
batteries when the low battery
icon fl ashes.
To eliminate the need for AA
batteries, use the AC adapter
designed for this product.
ADAPTER
JACK
NOTE: Using the AC adapter
will allow the display light
to remain on when LIGHT is
pushed.