Menu Operation - Beat    receiver Instruction Manual

7.MENU OPERATION

18) MENU FUNCTION LIST (MENU)
Press DISPLAY/ MENU for more than 3 seconds to access the menu.
in the display momentarily. Navigate the menu by pressing DISPLAY/ MENU momentarily to
move forward to the next option. The menu can also be navigated by using the Tuning Up
or Tuning Down Button to move to the next or previous option. Once the desired option
appears in the display, adjust that option by rotating the volume control(press the volume
up / down button ) within 5 seconds. The following options are adjusted through this menu
feature.
Pairing ( PAIR HF )
This feature is used to pairing the unit's Blue tooth system to your mobile phone or other
Blue tooth device. Under the MENU "Pairing" mode then press Audio button to start
activating the Pairing.
"PAIR HF" is special use for pairing with mobile phone with Bluetooth function,
if the pairing device is a Bluetooth Audio device, rotate the encoder to "PAIR
AD" then press Audio button to start activating the pairing with audio device.
Tips
Pls refer to BLUE TOOTH HAND FREE Operation regarding the details operation of
"PAIRING".
Re-connection/Dis-connection (RE-CON / DIS-CON )
This feature is allows to Re-connect or Dis-connect to the paired mobile phone or Blue tooth
device by manually. Under the Menu- "RE-CON"mode, Rotate the encoder to navigate thru
"RE-CON" (re-connection) and "DIS-CON"(Dis-connection). After selected the mode for
connection then press Audio button to start activating the connection mode.
Incoming call ringing volume (
The unit can preset the Ringing volume level for any incoming call. The default RINGING
VOLUME LEVEL VALUE is "25". Rotate the encoder knob to adjust from Min 00 to Max 42.
Time Set ( CLK )
The time on the clock will be set to 12:00 as the default. Program the current time by
rotating the volume control clockwise to adjust the minutes and counterclockwise to adjust
the hours.
AREA (TUNER FREQUENCY SPACING)
This option allows the selection of the frequency spacing appropriate for your area. "AREA
U.S.A." is the default setting. Rotate the volume control to select the U.S.A. Latin America,
Europe or Oirt options.
Local / Distance Select
This feature is used to designate the strength of the signals at which the radio will stop
during automatic tuning. "Distance" is the default, allowing the radio to stop at a broader
range of signals. To set the unit to select only strong local stations during automatic tuning,
rotate the volume control until "Local" appears in the display.
BT VOL)
E - 8
Will appear