Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Beat receiver
- Page 1 BLUETOOTH SUPPORT USB/ SD INTERFACE CAR CD/ MP3 / WMA PLAYER / RECEIVER INPUT BEAT375 CD/MP3/WMA/CD-R/CD-RW Player 4x40w TRANSFER IX-BASS MODE PS INFO COPY FOLD FOLD MENU MUTE CLEAR BAND DISP 4 10 R - 02 0896...
- Page 2 INPUT BEAT375 CD/MP3/WMA/CD-R/CD-RW Player 4x40w TRANSFER IX-BASS MODE PS INFO COPY FOLD FOLD MENU MUTE CLEAR BAND DISP This unit is equipped with the most advanced “TOUCH SENSE PANEL ” which is easy and convenient to use. Tips And here is some tips on how to use this touch sense panel: The pressing or activating of each button actually all you need is a very light touch, even not really necessary to “PRESS”...
-
Page 3: Note Of Discs
1. NOTE OF DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. -
Page 4: Installation
2. INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. - Page 5 Removing the unit a. Frame b. Insert fingers into the groove in the front of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove down wards and attach it.) c. Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click.
- Page 6 3. DETACHABLE CONTROL PANEL (D.C.P .) Removing The Detachable Control Panel (D.C.P .). 1. Turn the power off 2. Press the D.C.P . release button 3. Remove the D.C.P . PANEL RELEASE BUTTON Attaching the DCP 1. Attach the panel at the right side first, with point B on the main unit touching point A on the D.C.P .
- Page 7 4. WIRING DIAGRAM (20 PIN + ISO PLUG) ANTENNA ANTENNA EXTENDER JACK CABLE FUSE 20-PIN AUDIO/POWER HARNESS (See Figure 1) WHITE iPod iPod ready cable RCA-TO-RCA CABLES WHITE (not supplied) GREY REAR LINE OUT WHITE BLACK FRONT LINE OUT CONNECTOR (See Figure 2) WIRE COLOR FUNCTION/LABEL...
-
Page 8: Control Panel Function
5. CONTROL PANEL FUNCTION INPUT BEAT375 CD/MP3/WMA/CD-R/CD-RW Player 4x40w TRANSFER IX-BASS MODE PS INFO COPY FOLD FOLD MENU MUTE CLEAR BAND DISP OPERATIONS: SYSTEM TUNER CD/M P3/W MA Blu e Tooth iPod Short Long Short Long Short Long Short Long Short Long Press... -
Page 9: Basic Operations
6. BASIC OPERATIONS 3) PANEL RELEASE BUTTON (REL) Press this button to remove the control panel. 1) POWER ON/OFF BUTTON ( Press POWER button or any other button on the front of the radio to turn the unit on. Long Press POWER button again to turn the unit off. -
Page 10: Menu Operation
7.MENU OPERATION 18) MENU FUNCTION LIST (MENU) Press DISPLAY/ MENU for more than 3 seconds to access the menu. Will appear in the display momentarily. Navigate the menu by pressing DISPLAY/ MENU momentarily to move forward to the next option. The menu can also be navigated by using the Tuning Up or Tuning Down Button to move to the next or previous option. - Page 11 Regional On/Off ( REG ) REGIONAL “OFF” will be displayed by default. The user now has 5 seconds to adjust by using volume up/down button from “off” to “On” . If “on” is selected when the AF search or PI seek, it will implement to station which have all the PI codes which are the same as current station..
-
Page 12: Audio Operation
8. AUDIO OPERATION Audio Menu Press “AUDIO button to access the Audio Menu. User can navigate thru the Audio Menu items by ” pressing the / “AUDIO” button repeatedly, or by pressing the Tuning Up or Tuning Down Button. Once the desired menu item appears on the display, adjust that option by using the Volume Up or Down button within 5 seconds. -
Page 13: Tuner Operation
9. TUNER OPERATION 7) BAND BUTTON (BAND/SEARCH) Press BAND to change between FM bands and AM(MW)bands. 20-21) TUNING UP/DOWN BUTTON ( Manual Tuning Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio frequency number up or down one step. -
Page 14: Rds Operation
10. RDS OPERATION RDS functions The unit is equipped with the following RDS function: - AF Alternative Frequencies - CT Clock Time - EON Enchanced other Network - PI Program identifications - PS Program service name - PTY Program Type - REG Regional Change - TA Traffic Announcement - TP Traffic program... -
Page 15: Cd/Mp3/Wma Operation
11. CD /MP3/WMA OPERATION INSERT AND EJECT CD Insert a CD label-side up with the unit turned on, and the disc will begin to play. Press the Eject button to stop CD play and eject the CD. The unit does not have to be turned on to eject the CD. - Page 16 Up to 200 characters can be displayed in the long file name format. For a list of available characters, see the instruction manual of the writing software and the section “Entering File and Folder Names” below. The media reproducible on this unit has the following limitations: Maximum number of nested folders: 8 Maximum number of files per disc: 999 Maximum number of files per media device: 2000...
- Page 17 Files Playing Order When selected for play, Folder Search, File Search or Folder Select, files and folders are accessed in the order in which they were written by the PC writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
- Page 18 File/Folder Repeat play : Press M3 button more than 3 seconds during playing MP3/WMA disc for “repeat play” all files of the current folder. And keep on repeat playing the current folder until “repeat play” is disabled. To disable current folder “repeat play”, long press M3 button more than 3 seconds Press M3 button less than 3 seconds to “repeat play”...
-
Page 19: Usb Operation
1 . USB OPERATION The unit can support USB Host Function. It can playback MP3 and WMA Audio format which are stored into USB Memory Stick or USB interface Music Player. Please read below before you start the operation of USB HOST Function. Inserting and Removing USB Drive Removing USB Drive Step... -
Page 20: Memory Card Operation
13. MEMORY CARD OPERATION The unit can support playback MP3 and WMA Audio format which are stored into SD Memory Card . Pls read below before you start the operation of Memory Card Inserting and Removing a SD card on the main unit Face Click Insert the Memory Card... -
Page 21: Music Files Copying / Transferring
14. MUSIC FILES COPYING / TRANSFERRING Thanks for the most useful and convenient files transferring function of this unit, user can easily transfer music files between USB Stick, SD Memory card and on the CD Disc. Please read below for the details operation of this function: TRANSFERABLE MEDIA Files are transferable within the following media: Removable USB Stick... - Page 22 TRANSFER MP3 OR WMA MUSIC FILES BETWEEN MEDIA DEVICES Select a device by mode button and playback the music file need to be transfer: 1.Long press the COPY button to activate the transfer mode. 2.The LCD will display as default, Rotate the encoder volume knob to navigate thru >...
-
Page 23: Music Files Erasing
15. MUSIC FILES ERASING You can erase files from the USB Stick or Memory Card Please read below for the details operation of this function: ERASABLE MEDIA USB Stick and Memory Card. Music files which are on the CD Disc is NOT ERASABLE By this unit. ERASING MUSIC FILES ON THE MEDIA There are THREE different methods for erasing files;... - Page 24 3.Erase under Files NAVIGATE search mode You can select a Music file want to erase by files Navigate Search mode After selected the music file want to erase by files navigate search, Long press BAND button to activate the ERASE mode. The LCD will display Short Press the AUDIO button to enter into the ERASE mode Once Enter into the ERASE mode, user can rotate the encoder to select “...
-
Page 25: Files Manager
16. FILES MANAGER The advance “File Management.” System of this unit can help to well you organize all the music files just like a PC . Pls read below for details: FOLDERS MANAGEMENT This unit will automatically self-create the below default folders onto any USB /SD media device, once these devices are inserted into the unit. -
Page 26: Ipod Operation
17. iPod OPERATION This unit is equipped with iPod Ready function when purchased with the optional accessory cable BT-IPD which allow you to have direct control of your iPod on the front panel control button and display iPod song information on the LCD display. Please read below for more details on operation. - Page 27 iPod information Display on the Head Unit LCD This unit can display the Song, Artist, Album name and Elapsed time on the LCD display, these information can be displayed by pressing the AS/PS button repeatedly while a iPod Song file is playing Searching a Desire Song Under iPod playback mode, press BAND to enter into the iPod Searching Mode.
-
Page 28: Bluetooth Hand Free Operation
18.BLUETOOTH HAND FREE OPERATION User Guide For Bluetooth Operation 1. When user use our Blue tooth HEAD UNIT, please make sure the mobile phone you use must / does support Bluetooth functions (Headset or Handsfree profiles or both) 2. Before you start to use our Bluetooth HEAD UNIT, please make sure complete pairing with your mobile phone first. - Page 29 Bluetooth Hand Free Panel Function Key Matrix INPUT BEAT375 CD/MP3/WMA/CD-R/CD-RW Player 4x40w TRANSFER IX-BASS MODE PS INFO COPY FOLD FOLD MENU MUTE CLEAR BAND DISP Panel Function Button Bluetooth Hand Free Function PHONE/AUDIO ( Short Press ) Confirm to answer an incoming call 1.
- Page 30 PAIRING Pairing The Bluetooth System Between User’s Mobile Phone & The Unit Access into MENU - PAIRING mode to activates the operation of Pairing . Please see MENU Operation for more details of how to access into MENU mode . Once the is appearing on the LCD Display, press the AUDIO button to activate the Pairing mode.
- Page 31 The unit will be Auto Re-Connection by following operation . Every time turn the ignition key from off to on, the unit will Auto re-connect with the Mobile Phone. Dis-Connection of the Bluetooth System The unit have a option function for user to disconnect the Bluetooth system with the unit. The unit can be Dis-connected by the following methods.
-
Page 32: Outgoing Call
OUTGOING CALL Making An Outgoing Call User can use his / her Mobile Phone to dial and make an outgoing call. Once the user has completed the dialling, the display should show “ ”. The audio output of the present mode will ONLY be muted after pressing the “PHONE” button as a confirmation to dial the outgoing call. - Page 33 Bluetooth Audio Streaming A2DP (Advanced Audio Distribution Profile) User can listen to music files on an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth Technology. Please read the below instruction before operating the Bluetooth Audio streaming function on this unit.
- Page 34 Operating an audio device with this unit AVRCP ( Audio Video Remote Control Profile ) This unit can perform the following operations with the connecting Audio device which supports AVRCP (Audio Video Remote Control Profile) & only if the Audio device does support AVRCP.
-
Page 35: Remote Function
19. REMOTE FUNCTION EJECT DISP MENU MUTE MODE TRACK AUDIO BAND ENTER SEARCH AS/PS F - DN F - UP COPY X-BASS OPERATIONS: SYSTEM TUNER CD/MP3/WMA iPod Short Long Short Long Short Long Short Long Press Press Press Press Press Press Press Press... -
Page 36: Specifications
20.SPECIFICATIONS CD PLAYER Compact disc audio system System Compact disc Usable disc 44.1KHz Sampling frequency 1bit No of quantization bits 5-20,000Hz Frequency 2 stereo Number of channels 70dB S/N Ratio MEDIA SECTION USB Host Host 1.1 compatibles 2.0 Memory Card Support Type of Memory Card RADIO SECTION 87.5-108 Mhz... -
Page 37: Troubleshooting
21. TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution The car ignition is not on. No power If the power supply is properly connected to the car accessory terminal, switch the ignition key to “ACC”...