Mount Assembly - Patriot Antenna Rx Installation & Assembly Instructions Manual

Mount Assembly

1. Place the Pipe Adapter Assembly on to the 4in OD ground pipe, using 1/2" x 1 1/2" bolts.
2. Attach the Az-El Assembly on to the Pipe Adapter Assembly using 1" x 5" bolt, washer, and
lockwasher.
3. Attach the Azimuth Fine Tune Rod as shown using 1/2" x 1 1/2" bolts,nuts, and washers.
4. Install the Elevation Pivot Block as shown using 1/2" x 1 1/2" bolts, nuts, and washers.
1" x 5" Bolt, Flat washer
and lockwasher
Elev Pivot
Block
1/2" x 1 1/2" Bolts
nuts, & washers (2 )
6
Pipe
Adapter
assy
Az-El assy
Clevis
Assy
1/2" x 1 1/2" Bolts
nuts, & washers (2)
1/2" x 1 1/2" Bolts
(6 )
Azimuth Fine
Tune Rod