Advertisement
RINSE AID INJECTORS 7.7.0.1
/ 7.7.0.1/1
MACHINE PRODUCTION
From September 97 our supplier of rinse aid injectors have changed the design of the in
& out end connections to improve the quality of fitting.
The connection on the rinse tank has also been improved.
Both ends of the injector and the rinse tank connection are now push on fit with a
ridge, where a clip is fitted on the rinse tank and cable ties on the injector.
REPLACING WITH OLD STYLE INJECTOR
If a RINSE AID INJECTOR needs replacing you can use the old type , but , the end caps
need changing over, ( do not loose the cut washer/spring & ball).
SERVICE REPLACEMENTS
When the existing stocks of the old style are exhausted the new style will be supplied
with a small kit of parts and the instructions. ( copy attached)
Please note: if required you can change the end caps for the old style, but do not loose
the cut washer /spring & ball.
injwo2 11/11/97
Advertisement
