Table of Contents
Advertisement
Hardware Basic – Charging, Power On/Off, Reset
Battery
Please fully charge the PND the first time you it. You can use the in-vehicle adapter provided in the box
to charge the PND in the car. The LED indicator located next to the Mini USB Power Port (no. 5 above)
will be coloured red during charging and it will turn green when the battery is fully charged.
Power Off Mode & Sleep Mode
Pushing the on/off button on the top of the PND firmly for around three or four seconds will turn the PND
on or off (Power Off Mode). When using Power Off Mode the battery will hold its charge for much longer
however when you turn the device back on it will take longer to obtain a GPS signal in this mode.
For a faster GPS signal performance use Sleep Mode by pushing the on/off button down for only a
second or two. In Sleep Mode the PND will obtain a faster GPS fix however the battery will discharge at
a lot quicker than in Power Off Mode, even when the PND is off.
Reset Button
If the software freezes or the PND becomes unresponsive you might need to reset your device. The
reset button is located at the back of the PND. Remove the stylus from the side and gently press the
reset button for a few seconds to reset the device.
8
Advertisement
Table of Contents
