Dell Latitude E7250 Owner's Manual page 37

Option
Hyper-Thread Control
Table 8. Power Management
Option
AC Behavior
Auto On Time
USB Wake Support
Wireless Radio Control
Wake on LAN/WLAN
Block Sleep
Peak Shift
Description
Allows the computer to power-on automatically, when AC adapter is
plugged. The option is disabled.
• Wake on AC
Allows you to set the time at which the computer must turn on
automatically. The options are:
• Disabled (Default Setting)
• Every Day
• Weekdays
• Select Days
Allows you to enable the USB devices to wake the computer from
standby mode. The option is disabled
• Enable USB Wake Support
Allows you to control the WLAN and WWAN radio. The options are:
• Control WLAN radio
• Control WWAN radio
Default Setting: both the options are disabled.
This option allows the computer to power up from the off state when
triggered by a special LAN signal. Wake up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power
supply.
• Disabled - Does not allow the system to power on by special LAN
signals when it receives a wake-up signal from the LAN or wireless
LAN. (Default Setting)
• LAN Only - Allows the system to be powered on by special LAN
signals.
• WLAN Only
• LAN or WLAN
Allows you to block the computer from entering into the sleep state.
This option is disabled by default.
• Block Sleep (S3)
Peak Shift can be used to minimize AC consumption during peak powers
times of day. Set the start and end time to run in Peak Shift mode.
Description
Default Setting: Enable Intel
TurboBoost
Allows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled
37