Dell Latitude E7250 Owner's Manual page 32

Option
Advance Boot Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
Parallel Port
Serial Port
32
Description
• Onboard NIC
You can also choose the Boot List
option. The options are:
• Legacy (Default Setting)
• UEFI
This option is required for Legacy boot
mode. This option is not allowed if
Secure Boot is enabled.
• Enable Legacy Option ROMs — This
option is disabled by default.
Allows you to set the date and time.
Description
Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE: This option is
enabled by default.
• Enable UEFI Network Stack: This
allows you to enable UEFI
Networking Protocols in pre-OS and
early OS networking environment.
Allows you to define and set how the
parallel port on the docking station
operates. You can set the parallel port
to:
• Disabled
• AT
• PS2
• ECP
Identifies and defines the serial port
settings. You can set the serial port to:
• Disabled
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may
allocate resources even if the
setting is disabled.