Part 1. Static Ip Address - Okina Quick Setup Manual

Network Setup: Static IP Address & DDNS

Part 1. Static IP Address

1. Enter Main Menu screen by pressing the MENU
button on the front panel of the DVR.
Then enter password "123456" and click Login
3. Select Network.
5. After Apply, the IP Address, Netmask, Gateway, and DNS addresses should automatically be generated.
*For STA
TIP: Write down HTTP Port, Server Port, and IP Address on a piece of paper for reference. You will need
these numbers later in the installation.
TIP: If you do not know a DNS address and the DVR did not populating those fields by itself, try 8.8.8.8 and
8.8.4.4. These are Google's public DNS addresses, and in addition to working well.
6. Uncheck "Obtain an IP address automatically" to turn off this feature and make IP Address stay the same. Then
2. Select Setup.
Select "Obtain an IP address automatically,"
4.
turn on this feature.
Then Select Apply at the bottom of the screen
to restart the network.
This will generate a new IP Address.
(Make sure Ethernet Cable is plugged in)
click Apply.
Continued For DDNS
Set up
7
HDRH-44-2U Quick Setup Guide
Part 2
R201304-V10