Installation - Gaswinkel HP24 Owner's Manual

Take care of the pellet. Do not damp or crush it or it will affect the efficiency and the dust will
be collected on the door glass.

Installation

1. Deciding where to Locate your Pellet Appliance:
When installing this unit on a combustible floor (for example linoleum, hardwood flooring) a
non-combustible hearth pad (15mm thickness) must be under the unit suitable to
withstand the weight of the appliance. The pad must extend at least the width of the
appliance [22" (558 mm)] and at least the depth of the appliance plus 6" (153 mm) in front of
the appliance [29 3⁄4" (756 mm)].
The clearance between the walls or to the top should be no less
than the size in the figure.
2 Electrical:
The unit must be grounded (earthed). The grounded electrical cord should be connected to a
standard 230V, 50Hz electrical outlet. Be careful that the electrical cord is not trapped under
the appliance and that it is clear of any hot surfaces or sharp edges and also must be
accessible. If this power cord should become damaged, a replacement power cord must be
purchased from a reputable dealer.
3 Air input and venting pipe Installation
Before setting out to installing the appliance, it is imperative that all national and
local regulations and European Standards are complied with
with local government and authorities as necessary.
Min. installation clearance (mm)
Page 8 / 19
Please consult