Sony MEX-BT39UW Owner's Record page 13

L BT (BLUETOOTH) button page 9, 21,
23
For Bluetooth signal on/off (press); pairing
(press and hold).
M PTY/CAT*
4 button page 16
To select PTY in RDS.
N Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/USB:
(1): REP page 16, 17, 19
(2): SHUF page 16, 17, 19
(3)*
/(4): ALBUM –/+ (during MP3/
5
WMA/AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
(5): MIC/ZAP page 21
To enter ZAPPIN™ mode (press).
(6): PAUSE
To pause playback. To cancel, press
again.
Bluetooth audio device*
(1): REP page 26
(2): SHUF page 26
(3)/(4): ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
(6): PAUSE
To pause playback. Press again to
release pause.
Bluetooth phone:
To call stored dials (press); to store preset
dials (press and hold).
(5): MIC/ZAP (during a call) page 25
To set the MIC Gain (press); to select
Echo Canceller/Noise Canceller mode
(press and hold).
O DSPL (display)/SCRL (scroll) button
page 15, 16, 17, 18, 19, 23
To change display items (press); scroll the
display item (press and hold).
P AUX input jack page 30
To connect a portable audio device.
Q RESET button (located behind the front
panel) page 6
R Microphone page 23
Note
Do not cover the microphone, the handsfree
function may not work properly.
1 :
*1 When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
*2 When a cellular phone (supports PBAP of
Bluetooth technology) is connected.
*3 If an HD Radio tuner or SAT tuner is connected:
when (SOURCE/OFF) is pressed, the connected
device ("HD," "XM" or "SR") will appear in the
display. Furthermore, if (MODE) is pressed, you
can switch the HD Radio tuner band or SAT tuner
band.
*4 When the SAT tuner is connected.
*5 This button has a tactile dot.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE/OFF) on the unit is
pressed, or a disc is inserted to activate the unit first.
13