Specifications
Feature
Minimum Illumination
S/N Ratio
Scanning System
Synchronous System
Auto Electronic Shutter
Gamma Characteristic
IR Distance
Video Output
Auto Gain Control
Power/Current
Dimension
Weight
Storage Temperature
Operating Temperature
Troubleshooting
No picture after providing power
Check the power connection to the power supply to the power outlet for connectivity.
Check the power supply voltage.
Check all connecting cable and monitors for loose connections.
Check the monitor settings
The picture has interference or ripples
This may be caused by the power supply's arc, poor quality cable, too long cable, or improper
ground connection.
The picture background color changes continuously
A fluorescent light's electromagnetic field may cause color roll. Reduce the number of
fluorescent lights or increase the distance between the camera and the lights to reduce this
effect. Use of a power supply with external sync may solve the problem.
Blurred Image
Check the dome cover for dirt or imperfections
Check the focus to make sure adjusted correctly
Check the lens of the camera to make sure it is clean. Only use a dry, clean lens cloth to clean
the lens. Never touch with your fingers.
CAMERA ELI‐EDC USER MANUAL
Specification
0.001 Lux / 0 Lux (with IR LED ON)
More than 50dB
2:1 Interface
Internal, Negative sync
NTSC: 1/60s~1/100,000s / PAL: 1/50s~1/100,000s
0.45
20 Meters (with ȼ5x21 pcs Infrared LED)
1Vpp. 75Ω
Auto
DC 12V (+/‐10%) 350mA
ȼ127 x 95(H) mm
520g
‐30°~60°C RH 95% Max
‐10°~45°C RH 95% Max
Page | 9
eLineTechnology.com