Operating; Adjusting The Volume; Temporarily Muting The Sound; Selecting An Input Signal - Projector CP-X201 User Manual

Operating

Adjusting the volume

1.
Use the VOLUME +/VOLUME - buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the volume.
If you do not do anything, the dialog will automatically disappear after
a few seconds.
● When is selected for current picture input port, the volume adjustment
is disabled. Please see AUDIO item of AUDIO menu (35).
● When the projector is in the standby mode, the volume can be adjusted
if is not selected for the AUDIO OUT STANDBY of AUDIO (35).

Temporarily muting the sound

1.
Press MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
To restore the sound, press the MUTE, VOLUME + or VOLUME - button. Even if
you do not do anything, the dialog will automatically disappear after a few seconds.
● When is selected for current picture input port, the sound is always
muted. Please see AUDIO item of AUDIO menu (35).
● When is selected to VIDEO (NTSC), S-VIDEO (NTSC) or COMPONENT
(525i (480i)) port, the C.C. (Closed Caption) is automatically activated if the
C.C. is set to AUTO in the DISPLAY of the C.C. menu and the input signal
from the port supports the C.C. feature (53).

Selecting an input signal

1.
Press INPUT button on the projector.
Each time you press the button, the projector switches its input
port from the current port as below.
COMPUTER IN 1  COMPUTER IN 2
VIDEO S-VIDEO
● While TURN ON is selected for AUTO SEARCH item in OPTION
menu (40), the projector will keep checking the ports in above order
repeatedly till an input signal is detected.
1.
Press COMPUTER button on the remote control.
Each time you press the button, the projector switches its input
port from the current port as below.
COMPUTER IN 1  COMPUTER IN 2
● While TURN ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially till an
input signal is detected (40). If COMPUTER button is pushed when
VIDEO, S-VIDEO or COMPONENT port is selected, the projector will
check COMPUTER IN1 port first.
(continued on next page)
COMPONENT (Y, Cb/Pb, Cr/Pr)
http://www.pureglare.com.au
Operating
VOLUME +/- button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
MUTE button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
INPUT button
COMPUTER button
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH BLANK
FREEZE PAGE VOLUME
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
5