Vertex Standard VX-800 Service Manual page 7

Call/Reset
This feature, if enabled, allows the user to change
the 3-digit Page Call code, used to call other simi-
larly-equipped stations. Press the Dealer-assigned
Soft key, followed by the three digits representing
the Page Call code of the station you wish to call.
Three tones will be heard after the last key is pressed
(the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
Speed Dial
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the numbered key corre-
sponding to the Auto-Dial memory number list pro-
vided by your Dealer while pressing the PTT switch.
Once the telephone number has begun (you will hear
the tones in the speaker), you can release the PTT
switch.
Emergency
The VX-800 includes an "Emergency" feature which
may be useful if you have someone monitoring on
the same frequency as your transceiver's channel.
For further details contact your nearest dealer.
ARTS
(A R T
UTO ANGE
This system is designed to inform you when you and
another ARTS-equipped station are within commu-
nication range.
During ARTS operation, your radio automatically
transmits for about 1 second every 25 seconds (the
interval is programmed by the Dealer) in an attempt
to shake hands with the other station.
If you move out of range for more than two min-
utes, your radio senses that no signal has been re-
ceived, a ringing beeper will sound, and "OUT OF
SERVICE" will scroll on the LCD. If you subse-
quently move back into range, as soon as the other
station transmits, your beeper will sound, and "IN
SERVICE" will scroll on the LCD.
S
RANSPOND YSTEM
Operating Manual Reprint
DTMF P
This system allows paging and selective calling, us-
ing DTMF tone sequences.
When your radio is paged by a station bearing a tone
sequence which matches yours, your radio's squelch
will open and the alert ringer will sound (unless you
have disabled it, as described previously).
The three-digit code of the station which paged you
will be displayed on your radio's LCD.
A
FVP-25
Encryption/DTMF Pager Unit
F2D-8
2-Tone Decode Unit
FNB-V57
7.2 V 1100 mAh Ni-Cd Battery
FNB-V57IS Intrinsically-Safe 7.2 V 1100 mAh Ni-
Cd Battery
FNB-V62LI 7.4 V 1600 mAh Lithium-Ion Battery
FBA-25A
Battery Case
VAC-800
Rapid Desktop Charger (for FNB-V57,
FNB-V57IS, FNB-V62LI)
NC-77B
120 VAC Compact Wall Charger for
FNB-V57/-V57IS
NC-77C
230-240 VAC Compact Wall Charger
for FNB-V57/-V57IS
NC-77F
220 VAC Compact Wall Charger for
FNB-V57/-V57IS
NC-77U
230 VAC Compact Wall Charger for
)
FNB-V57/-V57IS
VTP-50
VX-Trunk Unit
MH-50
Speaker/Microphone
A7A
CT-70
CT-29 to Radio Programming Cable
CT-71
PC Programming Cable
CT-72
Radio to Radio Programming Cable
ATU-6C
440~470 MHz Antenna
ATU-6D
450-485 MHz Antenna
Availability of accessories may vary; some accessories are
supplied as standard per local requirements, others may
be unavailable in some reqions. Check with your Vertex
Standard Dealer for changes to the above list.
S
AGING YSTEM
& O
CCESSORIES PTIONS
7