Amplifier Set-Up Options - EarthQuake Titan Telesto Manual

Amplifier Set-up Options

Single Amp. Option
For one Amplifier/Power Source per
system or per tower, leave gold
bridging bars on. Connect to the
Amplifier/Power Source from either
the high or the low terminals.
Bi-Amp. Option
The Telesto is designed to accept
two separate Amplifier/Power
Sources. For a Bi-Amplifier option,
take off gold bridging bars by
unscrewing terminals. Connect the
terminals to Amplifiers as shown
below. Be sure to tighten terminals
after bridging bars are off.
Amplifier/
Power Source
Telesto Manual 7
Power: 500W
Impedance: 4 Ohm
Frequency Response: 25Hz-40kHz
Sensitivity: 88dB/1m/2.83V
S/N:
HI
LO
EARTHQUAKE SOUND U.S.A
www.earthquakesound.com
Power: 500W
Impedance: 4 Ohm
Frequency Response: 25Hz-40kHz
Sensitivity: 88dB/1m/2.83V
S/N:
HI
LO
EARTHQUAKE SOUND U.S.A
www.earthquakesound.com
Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com
back view
Amplifier/
Power Source