Page 2
This owners manual is designed to better acquaint you with Earthquake products and to guide you through all phases of system design and application. It is imperative that you read this manual in its entirety. Earthquake technicians and staff are looking forward to answering any questions you might have.
How To Wire Your Earthquake Subwoofer In Parallel OHMS-LAW Series formula: PARALLEL WIRING Rt= R1+R2+R3+..Where R= Total system impedance Where Rt= Resistance seen by amplifier Example for series connection If using SINGLE 2 OHM coils the total load would be 2.0 ohm If using SINGLE 4 OHM coils the total load would be 4.0 ohm...
Page 4
Port tuned design for deep bass Sealed design for tight bass 19" 14" 16 1/2" 10 3/4 " 19" 13 1/2" 16" 9" TremorX12 TremorX12 TremorX12 Specifications are subject to change without notice. EARTHQUAKE SOUND • TREMORX SUBWOOFER ENCLOSURE DESIGNS...
Page 5
16 1/2" TremorX15-4/8 TremorX15-4/8 TremorX15-4/8 Passive tuned design for deep bass small volume Drone Tuned Box VB = 2 1/2 ft3 FB = optimized with SLAPS-15 passive Specifications are subject to change without notice. EARTHQUAKE SOUND • TREMORX SUBWOOFER ENCLOSURE DESIGNS...
• First year: Earthquake pays for labor, parts, and ground freight (only in US properly filled & returned to Earthquake with a copy of the sales invoice.