Date And Time Stamp; Lookup Table; Branch - Metrologic SP5500 OptimusS Series User Manual

Application Creation
Record selection options (cont.)
Save and Output Record – This selection option allows the developer to configure the
Save and Output Screen – The Save and Output Screen setting will save the

Date and Time Stamp

The date and time stamp can be customized as well. The date and time stamp can be added to
the front or end of the transactional data collected. The format of the time stamp can also be
customized to fit the desires of the customer (See figure 6).

Lookup Table

The lookup table property gives the developer the option of setting up a specific lookup table to
be accessed for use with the form.

Branch*

Branching allows the user to use function keys to automatically
leave the current form and go directly to another form or menu
without having to save data. To setup the Branching properties
simply use the drop down menu and select the form that will
correspond with the particular function selected. There are a
maximum of four function keys that can be setup to perform this
operation.
*
Using the Branch setting limits the capability of the available function keys.
This option is not available when the application template selected is either
OptimusS WLAN or OptimusR WLAN.
Form to accomplish two tasks instantly. It allows the
transactional data to be saved in a table on the unit and
outputs data directly to the host device.
transactional data in a table on the unit and output the entire
contents of terminal's screen (prompts and data).
Figure 6 Date and Time Stamp settings
12
Figure 7