Rodgers 690 Owner's Manual page 59

l
•'
690/610 Owner's Manual
1.0 Addendum
6/9 3
Chorus Control
The 690 and 610 features a CHORUS function, which allows the Swell
Division to be detuned from the Great Division, providing even greater
"warmth" to the tonal character of the organ. To select the CHORUS
function, press the CHORUS piston.
To change the amount of detuning, hold the SET piston and press the
CHORUS piston. The CHORUS piston will begin to flash. The amount of
detuning may then be adjusted by rotating the tuning control. Press the
CHORUS piston to save the new CHORUS adjustment. Pressing General
Cancel (0) instead of the CHORUS piston will cancel the new CHORUS
adjustment and return the organ to its previous CHORUS setting.
Sustain Switch
This switch is located on the far left side of the Great/Pedal expression
pedal. This switch will sustain voices playing from the MIDI ON GREAT
coupler. Press the switch to sustain, release to stop. Pressing this switch
sends a MIDI Sustain Message on the MIDI ON GREAT coupler channel. If
the MIDI ON GREAT coupler is on then pressing the sustain switch will
cause a MIDI Sustain Message to be sent out the corresponding MIDI
Channel.
Receiving Program Changes and GS Variation Select
Changes from a PR-300
When in a MIDI set Mode, if a Program Change or a Variation Select on
the MIDI Channel for the flashing coupler is received, it will be saved and
retransmitted each time the coupler is turned on.
How to Set the TUTTI on the 690
1. Select the stops desired.
2. Hold SET and press TUTTI.
When the TUTTI is activated, the selected stop tabs do not light.