Rodgers 690 Owner's Manual page 23

To send a Variation Select and Program Change message from a MIDI coupler:
1.
Hold SET.
2 . .
Press and hold selected MIDI coupler (coupler will flash as it is held).
3. Release SET and press key which corresponds to the variation desired:
Low C (Great) Variation 0
Low C# (Great)
Variation 1
Low D (Great)
Variation 2
etc.
Low C (Swell) Variation 61
Low C# (Swell) Variation 62
etc.
Low C (Pedal)
Variation 122
Low C# (Pedal)
Variation 123
etc.
Low F (Pedal) Variation 127
4. After Variation is selected, release MIDI coupler (it will continue to flash).
5. Press key which corresponds to the Program Change desired:
Low C (Great)
Low C# (Great)
Low D (Great)
etc.
Low C (Swell)
Low C# (Swell)
etc.
Low C (Pedal)
Low C# (Pedal)
etc.
Low F (Pedal)
Program Change 1
Program Change 2
Program Change 3
Program Change 62
Program Change 63
Program Change 123
Program Change 124
Program Change 128
If no Variation Select message is specified, Variation 0 will be used.
Pressing General Cancel at any time during will exit the procedure.
15