Rear Panel Description - Krell Industries KRC-HR Owner's Reference Manual

REAR PANEL DESCRIPTION
INPUTS
Four single-ended inputs via standard RCA connectors
PH (Line level input if phono board is not installed)
S-2
S-3
S-4
Two balanced inputs via standard XLR connectors
B-1
B-2
Tape input via standard RCA connectors
MAIN OUTPUTS
Single ended RCA output connectors
Balanced XLR output connectors
Balanced XLR output pin configuration:
Pin 1 Shield (ground)
Pin 2 Non-inverting (hot)
Pin 3 Inverting
TAPE OUTPUT
Record output via RCA connectors
7