Table of Contents
Advertisement
KPS-20i
AND KPS-20i/I
DETAILS
This is a description
of the additional
features
and functions
common to the
KPS-20i and KPS-20i/I.
Please
contact
your KRELL dealer
or the KRELL staff
for assistance
if there are any questions
not covered~in this Reference.
Please
refer
to the KPS-20i and KPS-20i/I
Typical
System Setups
illustrations
on
pages 24 and 25.
CAUTION: When making connections
to this
component or any other,
make sure
the power amplifier
is OFF and the preamplifier
is in the MUTE or STANDBY
mode.
ANALOG OUTPUT CONNECTIONS
The KPS-20i
and
KPS-20i/I
are
equipped
with
two analog
output
configurations:
Single-ended
via
RCA connectors
and balanced
via
XLR
connectors.
If your preamplifier
has high level
balanced inputs,
we recommend
the balanced
outputs
be used.
There are considerable
sonic
benefits
to be
gained with use of the balanced format.
The XLR pin configuration
is described
below.
Pin 1
Ground
Pin 2
Non-inverting (0
°)
Pin 3
Inverting ( 180
°)
The left
and right
channel
RCA and balanced
outputs
are labeled
on the back
panel.
Care should
be taken
that
the
correct
left/right
orientation
is
maintained.
NOTE: These two outputs
can be used to simultaneously
feed different
systems.
EMPHASIS LED
Emphasis
is part
of an encode/decode
recording
technique.
Discs
and/or
tracks
that
were recorded
with this
process
will
cause the Emphasis LED to
illuminate.
When the Emphasis LED is lit
the appropriate
circuitry
is activated
to provide fiat
frequency response.
~
13
Hide quick links:
Advertisement
Table of Contents
