Krell Industries KPS-20i Owner's Reference Manual page 10

0-9 NUMBERED KEYPAD: The direct access keypad makes track selection
quick and easy. When using the direct track access function, the selected
track will begin play immediately after a one or two o.digit number is selected.
Select the number of your choice directly or follow the program selection
sequence if writing a program..
RANDOM: Will play tracks in a non-selected order. Press the Random button
and the disc will begin play in a sequence other than the original. Press again
and another randomly selected track will play. Press Stop to exit the Random
play mode.
INTRO: Plays a 20 second sample of each track on the disc. Press the Stop
button to resume normal play.
DISPLAY: Toggles between the time into the current track and the amount of
total disc time remaining.
DIM: Shuts off the display and function LEDs. Second press activates the
display and function LEDs.
A/B: The KPS-20 can make a loop between two pre-determined points within a
track. This is helpful when you need to repeat a specific segment of a track.
How to Create an A/B Loop:
Start play of track. When you hear the part that you want as the beginning of
the loop press A/B to insert the start position. Press A/B again to insert finish
position. A/B play will automatically begin and continue indefinitely. Press
Stop or A/B again to delete the A/B program.
ACCESS: The Access function gives you the ability to numerically select a
position within a specific track program. This is valuable when exact start
positions are critical.
9