Fx Select Button - Traktor Kontrol S8 Manual

Name
(2) FX Button 1:
(3) FX Button 2
(4) FX Button 3
(5) FX Button 4
(6) FX Knob 1
(7) FX Knob 2
(8) FX Knob 3
(9) FX Knob 4
FX Unit 2 has the same layout as FX Unit 1, apart from the
cated in the top-right corner of the device.
4.3.2

FX SELECT Button

Press the FX SELECT
►
figured on the left display, FX 2 on the right one.
FX SELECT Button
This menu stays on the display until the
ed, the FX SELECT button is dim.
Function in Single Mode
Activate/deactivate the entire FX Unit. -
Reset all FX parameters to their de-
fault value.
Depends on the selected effect.
Depends on the selected effect.
Adjust the ratio between the unpro-
cessed (dry) signal and processed
(wet) signal for the entire FX Unit.
Controls FX parameter 1.
Controls FX parameter 2.
Controls FX parameter 3.
button to open the FX Settings on the adjacent display. FX1 is con-
FX SELECT
Function in Group mode
Activate/deactivate FX slot 1.
Activate/deactivate FX slot 2.
Activate/deactivate FX slot 3.
Adjust the ratio between the unpro-
cessed (dry) signal and processed
(wet) signal for the entire FX Unit.
Control the 1st effect in the FX Unit.
Control the 2nd effect in the FX Unit.
Control the 3rd effect in the FX Unit.
FX SECTION button being lo-
button is pressed again. When disengag-
TRAKTOR KONTROL S8 - Manual - 200
Hardware Reference
The FX Unit