Table of Contents
Advertisement
OPERATING INSTRUCTIONS (CONT'D)
TO CHANGE SETTINGS FOR TEMPERATURE INTENSITY (CONT'D)
4. After the new setting has been saved and the toaster reached the new TEMPERATURE INTENSITY
setting the display will revert back to "P1" or "P2" menu.
CALIBRATION MODE
IT IS VERY IMPORTANT THAT YOU ADHERE TO THE FOLLOWING INSTRUCTIONS PERTAINING TO
THE CALIBRATION MENU. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN THE
MALFUNCTION OF YOUR TOASTER.
While not likely, it is possible that the user could accidentally access the calibration menu of the toaster. If the user
has entered the calibration menu, the display will read "00." Follow these instructions to immediately exit the
calibration menu:
1. If the display reads "00," you have accidentally entered the calibration menu.
2. Turn power switch to the "Off" position for 5 seconds then turn unit on. This will return the unit back to
normal operation.
12
!
IMPORTANT:
On / Off Switch
!
SRT3-10 - Ops Manual
Advertisement
Table of Contents
